What Are You Looking For?
2CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin NX/Nano
Brand
SGWRDModel
2CH GMSL2 Camera Developer Kit for NVIDIA Jetson Orin NX/NanoProduct Category
Adapter BoardConnector
1x22Pin ZIF connectorsOperating temp.range
-20°C~+65°CDimensions
80mm*53mmAdaptation Kit
Jetson Orin NX/NanoCamera Connector
Fakra Z CodeCamera Input
Camera*2(GMSL2/GMSL1)Deserializer
MAXIM(ADI) MAX9296AWeight
50g
Jetson Orin NX/Nano 2CH GMSL2 camera adapter board
SG2A-G2-M4L-F adapter board, which allows up to 2 cameras to be connected to the NVIDIAJetson Orin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. Asthere are many difffferent types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.
- Overview
- Adapter plate function
- Compatible with offfficial kits
Support for NVIDIA Jetson Orin Nano/NX Development Kit
- Compatible with different versions of NVIDIA JetPack SDK
Jetpack 5.1, L4T r35.2.1 and above
- Supports up to 2 GMSL cameras
- Support for synchronous triggering
Support for external trigger signals for camera synchronisation
- Cameras can transmit up to 15 metres
By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres.
The SG2A-G2-M4L-F is an adapter board for use with the NVIDIA Jetson Xavier/Orin Nano/NX kit. Thedriver package was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Xavier/Orin Nano/NX supports two typesof flushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script.
- Instructions for using the adapter plate
- Preparation required
- SG2A-G2-M4L-F adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit
- Computer with Ubuntu 18.04/20.04s 1
- USB TYPE-C data cable 1pc
- GMSL2 Repeater
Product Name | Description | Picture |
SG2-BP0102-GMSL2 GMSL2 Repeater |
GMSL2 Repeater can realize one GMSL2 input and one GMSL2 output,so as to extend the transmission distance. |
- Coaxial Cable
Product Name | Specification | Picture |
Double-Female Mini-fakra Coaxial Cable 4-in-1 |
|
|
Male and Female Mini-fakra Coaxial Cable 4-in-1 |
|
|
Double-Female Camera Coaxial Cable |
|
|
Male and Female Camera Coaxial Cable |
|