CAMERA CUSTOMIZATION
Home

Products

Product Category

Resolution

Sensor Model

ISP

New Products

  • GMSL Injection Card
    Mature autonomous driving HIL Video Injection Reinjection Solution   [CyberCobra] GMSL Video Injection Card(Hereinafter referred to as video injection card)is an high-speed image product based on FPGA.The video injection card adopts PCIe Gen3 technology, which can realize 8-channel video/image injection, and adopts high-precision multi-channel time synchronization technology to ensure that multi-channel data can be synchronized output, and the product is widely used in the hardware-in-the-loop HIL simulation system, digital acquisition and reinjection system, and video playback system and other scenarios.     Adopting PCIe Gen3 technology  Implement 8-channel video/image injection,High precision multi-channel time synchronization After collecting data was collected by autonomous vehicles, algorithm validation and optimization are required, which requires a data injection system to achieve. The autonomous driving IPC will transmit the collected video data of the hard disks to video injection card through the PCIe interface. The video injection card will synchronously output 8 channels of video based on the timestamp, simulate the camera time sequence, and transmit it to the domain control through the GMSL interface.Video injection card support gPTP/PTP synchronization, achieving time synchronization through switches, IPC and ACU, ensuring that all devices in the system are on the same timeline.     [CyberCobra] GMSL Video Injection Card  Independently developed and deeply adapted high-speed image products Typical applications▼ Domain controlled image reinjection and simulation testing platform Independently developed and deeply adapted high-speed image products     ◎ Support user to inject the video data ◎ Support for user injection of video datarendered by GPU graphics card emulation ◎ Support for external trigger signals to control the simultaneous output of all channels ◎ Support synchronized output according to timestamp ◎ Support gPTP/PTP synchronous   Features and Advantages ▼ ◉  PCle sustainable bandwidth up to 4800 MB/s  ◉  Output video format support YUV422,RAW10/12/14 ◉  Zynq™ UltraScale+™ ZU7EV MPSoC ◉  Support Simulate I2C messages between ECU and camera ◉  Real-time processing of large amounts of data independent from other hardware requirements ◉  Support ECU external trigger signal control for simultaneous output of all channels  ◉  High-performance DMA engine for data transfers from host ◉  Support Timestamp-based playback of RAW video data ◉  Serializer support MAX9295A,MAX96717F,MAX96717… ◉  Synchronization of multiple base boards ◉  Deserializer support MAX9296A,MAX96712,MAX96716,MAX96718…  ◉  Output video resolution supports up to 8 channels 3840 × 2160@30fps ◉  Synchronization of multiple base boards ◉  Linux and Windows supported    
    Read More
  • MIPI CSI-2 Camera
      20MP IMX283 MIPI CSI-2 Camera Overview  SG20-IMX283C-MIPI-Hxxx camera module is equipped with SONY CMOS image sensor IMX283,20 million high-resolution image output, excellent performance in UAV high-altitude shooting, ground remote monitoring and close-range industrial detection , can be adapted to different SOC platforms. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Name Adaptation Developer kit NVIDIA MIPI CSI-2‍ Camera Developer Kit NVIDIA Jetson Orin Nano/Orin NX Developer Kit If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Raw output 2. Support binning mode  3. High sensitivity, low dark current 4. Excellent anti-blooming performance 5. Support Global Shutter exposure mode 6. Support different focal length lens Application 1. Machine-vision 2. Intelligent transportation 3. Aeronautics and Astronautics 4. Industrial inspection  
    Read More
  • MIPI CSI-2 Camera
      8MP IMX678 MIPI CSI-2 Camera Overview  SG8-IMX678C-MIPI-Hxxx camera module is equipped with SONY CMOS image(IMX678), is supplied with an M12 lens that is focused and glued in our factory,can be adapted to diference SOC platforms. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Name Adaptation Developer kit Maximum number of cameras connected Picture NVIDIA MIPI CSI-2‍ Camera Developer Kit NVIDIA Jetson Orin Nano/Orin NX Developer Kit  2 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Original RAW format,support binning 2. Industrial high performance 3. Support different focal length lens 4. Support external triggering 5. Multi−Camera synchronization Application 1. Machine-vision 2. Intelligent transportation 3. Aeronautics and Astronautics 4. Industrial inspection  
    Read More
  • MIPI CSI-2 Camera
      3MP ISX031 MIPI CSI-2 Camera Overview  SG3-ISX031C-MIPI-Hxxx camera module is equipped with SONY CMOS image sensor ISX031. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, can be adapted to different SOC platforms. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Name Adaptation Developer kit Maximum number of cameras connected Picture NVIDIA MIPI CSI-2‍ Camera Developer Kit NVIDIA Jetson Orin Nano/Orin NX Developer Kit  2 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: YUV422 format 2. Car gauge grade high performance 3. Support external triggering 4.  Multi−Camera synchronization Support 5. Support different focal length lens Application 1. Machine-vision 2. Intelligent transportation 3. Aeronautics and Astronautics 4. Industrial inspection  
    Read More
  • MIPI CSI-2 Camera
      2MP IMX662 MIPI CSI-2 Camera Overview  SG2-IMX662C-MIPI-Hxxx camera module is equipped with SONY CMOS image(IMX662),is supplied with an M12 lens that is focused and glued in our factory,can be adapted to diference SOC platforms. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Name Adaptation Developer kit Maximum number of cameras connected Picture NVIDIA MIPI CSI-2‍ Camera Developer Kit NVIDIA Jetson Orin Nano/Orin NX Developer Kit  2 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed RAW format 2. Industrial high performance 3. Support different focal length lens 4. Support external triggering 5. Multi−Camera synchronization Application 1. Machine-vision 2. Intelligent transportation 3. Aeronautics and Astronautics 4. Industrial inspection  
    Read More
  • FPD-Link IV Camera Board
      SGDA-J7EXPA01EVM TDA4 FPDLink IV Adapter board Consistent with the official development version design, compatible with the official board Overview  SGDA-J7EXPA01EVM add-on board is designed to expand the capability of Jacinto7 EVMs to include video capture capabilities.This hardware system can help kick start the development and evaluation of the Jacinto7 family of processors in many different automotive and industrial applications.The SGDA-J7EXPA01EVM provides the ability to interface with external camera sensors, radar sensors, and other similar capture devices through Texas Instruments FPD-Link serial links. The EVM can support up to twelve different inputs, and communicates with the processor through multiple MIPI D-PHY CSI2 interfaces. Adapter plate function Designed to work with Jacinto7 Processor EVMs Multiple capture inputs using Texas Instruments FPD-Link IV devices Supports up to 12 high speed image/data input ports simultaneously Each input can support 8MP+ imagers with 8.4Gbps line rates Supports variety of different sensors including image and radar modules Application Automotive front camera systems Automotive surround view and park assistance systems Industrial HMI Robot teach pendant ※ SGDA-J7EXPA01EVM TDA4 Application Daughter Board It is an application adapter board suitable for Texas Instruments TDA4 development board.  
    Read More
  • Texas Instruments Development Kits
      4CH TI TDA4V developer kit for Texas Instruments Overview  J721EXCP01EVM Common Processor Board The J721EXCP01EVM Common Processor Board for Jacinto™ 7 processors lets you evaluate vision analytics and networking applications in automotive and industrial markets. The common processor board is compatible with all Jacinto 7 processors system-on-modules (sold separately or as a bundle) and includes basic connectivity to Input/Output, JTAG and various expansion cards. SGDA-01413 Application Daughter Board  Consistent with the official development version design, compatible with the official board The SGDA-01413 Application Daughter Board , Allow up to four connections of 2 millionPixel camera, allowing up to four radar modules to be connected through coaxial cablesBlock. This design utilizes these coaxial cables to provide power and reverse direction for the sensor Channel communication and clock synchronization. These two 4Gbps FPDLink III quads Dao deserializer supports connecting mobile industry processors through Samtec connectors The dual output of the MIPI camera serial interface 2 (CSI-2) is connected to the Application processor. Adapter plate function Compatible with TI processor SDK for TDA4x processors Provide a wide voltage range for coaxial cable power supply Receive 8-channel high-speed data input through FPD-Link III synchronization function Provide a wide power supply voltage range (4V to 14V) for coaxial cable power supply Direct connection to EVM through CSI-2 interface The Automotive battery can directly provide power to the circuit board and has reverse current protection function Utilize MSP430 ™ MCU initialization and configuration video pipeline Designed to be compatible with onboard or external MCUs, with or without the use of MCUs Can be used with any camera that uses a compatible FPD-Link III DS90UB953 serialize Application Advanced Driving Assistance System (ADAS) Look around CMS and rearview mirror replacement ADAS Domain Controlle ※ SGDA-01413 TDA4V Application Daughter Board It is an application adapter board suitable for Texas Instruments TDA4V development board.  
    Read More
  • 2CH GMSL3 Camera Developer Kit for NVIDIA Jetson Orin NX/Nano
      Jetson Orin NX/Nano 2CH GMSL3 camera adapter board Overview  SG2A-G3-M4L adapter board, which allows up to 2 cameras to be connected to the NVIDIA JetsonOrin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. As thereare many different types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL2 and GMSL3 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications. Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 14 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 14 metres. Instructions for using the adapter plate The SG2A-G3-M4L is an adapter board for use with the NVIDIA Jetson Orin Nano/NX kit. The driverpackage was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Orin Nano/NX supports two types offlushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G3-M4L adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  
    Read More
  • Adapter Board for NVIDIA Jetson Orin NX/Nano
      Jetson Orin NX/Nano 2CH GMSL3 camera adapter board Overview  SG2A-G3-M4L adapter board, which allows up to 2 cameras to be connected to the NVIDIA JetsonOrin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. As thereare many different types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL2 and GMSL3 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications. Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 14 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 14 metres. Instructions for using the adapter plate The SG2A-G3-M4L is an adapter board for use with the NVIDIA Jetson Orin Nano/NX kit. The driverpackage was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Orin Nano/NX supports two types offlushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G3-M4L adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  
    Read More
  • NVIDIA Jetson Orin NX/Nano Development Kit
      Jetson Orin NX/Nano 2CH GMSL2 camera adapter board Overview  SG2A-G2-M4L-F adapter board, which allows up to 2 cameras to be connected to the NVIDIAJetson Orin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. Asthere are many difffferent types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.  Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 15 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres. Instructions for using the adapter plate The SG2A-G2-M4L-F is an adapter board for use with the NVIDIA Jetson Xavier/Orin Nano/NX kit. Thedriver package was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Xavier/Orin Nano/NX supports two typesof flushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G2-M4L-F adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  
    Read More
  • Adapter Board for NVIDIA Jetson Orin NX/Nano
      Jetson Orin NX/Nano 2CH GMSL2 camera adapter board Overview  SG2A-G2-M4L-F adapter board, which allows up to 2 cameras to be connected to the NVIDIAJetson Orin Nano/NX module, is fully compatible with the NVIDIA Jetson Orin Nano/NX Development Kit. Asthere are many difffferent types of GMSL cameras available, the adapter board can be adaptively operated atdifferent frequencies i.e. it is compatible with both GMSL1 and GMSL2 protocol interfaces through softftwareconfiguration. The GMSL camera is powered by PoC (Power over Coax), so all data, control signals and powerare sent over a 50 Ohm coaxial cable, making the camera's cable routing flexible and easy to install inautomotive applications.  Adapter plate function Compatible with offfficial kits Support for NVIDIA Jetson Orin Nano/NX Development Kit Compatible with different versions of NVIDIA JetPack SDK Jetpack 5.1, L4T r35.2.1 and above Supports up to 2 GMSL cameras Support for synchronous triggering Support for external trigger signals for camera synchronisation Cameras can transmit up to 15 metres By using the GMSL protocol for cameras, you can support stable and reliable transmission of cameras over long distances, with a maximum distance support of 15 metres. Instructions for using the adapter plate The SG2A-G2-M4L-F is an adapter board for use with the NVIDIA Jetson Xavier/Orin Nano/NX kit. Thedriver package was developed on a specific Jetson Linux version and you need to make sure the Jetson Linuxversion matches before installing the driver. r. If it does not match, you need to re-flash the system, otherwisethe system will not boot after installing the driver. r. NVIDIA Jetson Xavier/Orin Nano/NX supports two typesof flushing methods, using SDK Manager and via the Flash.sh script. Here is how to use the Flash.sh script. Preparation required SG2A-G2-M4L-F adapter board to NVIDIA Jetson Xavier/Orin Nano/NX kit Computer with Ubuntu 18.04/20.04s 1 USB TYPE-C data cable 1pc  
    Read More
  • GMSL2 Camera
      8MP AR0820 with ISP GMSL2 Camera Overview  SG8S-AR0820C-5300-G2A-Hxxx camera module is equipped with ONSEMI Semiconductor CMOS image sensor AR0820 and Maxim GMSL2. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board  NVIDIA Jetson AGX Orin/AGX Xavier Developer kit   8 CoaxCapture II GMSL Capture Card PC/IPC/PCIe3.0 8 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  
    Read More
  • SG3S-ISX031C-F3A-Hxxx camera module
      3MP ISX031 with ISP FPDLink III Camera Overview  SG3S-ISX031C-F3A-Hxxx camera module is equipped with SONY CMOS image sensor ISX031 and TI FPDLink III. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SerDes Camera to USB Converter SG8-U30-FPDLink NVIDIA Jetson Orin Nano/NX Developer Kit ARM platform/computer/industrial computer/USB3.0 interface 1     If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. External trigger support 4. Multi−Camera synchronization Support 5. Support different focal length lens 6. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  
    Read More
  • GMSL3 Camera
      8MP AR0820 with ISP GMSL3 Camera Overview  SG8S-AR0820C-5300-G3A-Hxxx camera module is equipped with ONSEMI Semiconductor CMOS image sensor AR0820 and Maxim GMSL3. It has an automotive-grade sensor with a well-tuned Image Signal Processor (ISP) that produces exceptional image quality, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG2A-G3-M4L-F‍ Adapter board NVIDIA Jetson Orin Nano Developer Kit   2 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: Uncompressed YUV422 format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  
    Hot Tags : GMSL3 Camera
    Read More
  • GMSL3 Camera
      8MP IMX728 GMSL3 Camera Overview  SG8-IMX728C-G3A-Hxxx camera module is equipped with SONY CMOS image sensor IMX728 and Maxim GMSL3(Max96793). It has an automotive-grade sensor without ISP, which comes with an IP67-rated enclosure – is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG2A-G3-M4L-F‍ Adapter board NVIDIA Jetson Orin Nano Developer Kit   2 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: RAW data format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  
    Read More
  • GMSL2 Camera
      8MP IMX728 GMSL2 Camera Overview  SG8-IMX728C-G2G-Hxxx camera module is equipped with SONY CMOS image sensor IMX728 and Maxim GMSL2(Max96717). It has an automotive-grade sensor without ISP, which comes with an IP67-rated enclosure is supplied with an AA lens that is focused and glued in our factory. Product Default  1. The default shipping status of this product is fixed lenses, and users do not need to focus or replace the lenses themselves. If you need to replace the lens independently, please make a note when placing an order. After replacing the lens, the image quality is not within the service scope. 2. When leaving the factory, the camera is not calibrated by default. If it is necessary to calibrate the camera's internal parameters and write them into the camera storage unit, please make a note when placing an order. Development/Capture Kits Adapter board/Image Solution Adaptation Developer kit/output interface Maximum number of cameras connected Picture SG8A-ORIN-GMSL2‍ Adapter board  NVIDIA Jetson AGX Orin/AGX Xavier Developer kit   8 If you need relevant development support, please contact Sales@sensing-world.com   Features  1. Output format: RAW data format 2. S-mount IP67 compliant lens focused and glued at our factory 3. Multi−Camera synchronization Support 4. Support different focal length lens 5. FCC , CE and RoHS Application 1. Automotive 2. ADAS + Viewing Fusion 3. High Dynamic Range Imaging 4. Autonomous Driving 5. Robots  
    Read More
  • 2-10 Meters long Male and Female Camera Coaxial Cable
    - 2~10 Meters long   - Male & Female interface   - IP67 Water-proof
    Read More
  • 2-16 Meters long Double-Female Camera Coaxial Cable
    - 2~16 Meters long   - Double-Female interface   - IP67 Water-proof
    Read More
  • Rosenberg/TE Male and Female Mini-fakra Coaxial Cable 4-in-1
    - Mini-fakra   - 4 in1   - 0.5Meters long   - Male and Female interface
    Read More
  • Rosenberg/TE Double-Female Mini-fakra Coaxial Cable 4-in-1
    - Mini-fakra   - 4 in1   -0.5Meters long   -Female interface
    Read More
1 2 3
A total of 3 pages

Leave A Message

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Submit

Home

Products

contact